Fiber Cement Siding in Moore, OK
Professional Fiber Cement Siding in Moore, OK in Moore, OK — Licensed, Insured & Locally Owned
Get expert fiber cement siding installation, replacement & repair in Moore, OK. Storm-rated, hail-resistant panels. Free estimates — call (405) 956-2724.
- Licensed & Insured
- Locally Owned & Operated
- Free Inspection & Estimate
Request Your
Free EstimateFiber cement siding is one of the most durable, weather-resistant exterior cladding options available — and for homeowners in Moore, Oklahoma, it is more than a style upgrade. It is a structural investment. Composed of Portland cement, sand, and cellulose fiber, this material resists impact, moisture, insects, and fire at levels that vinyl and wood simply cannot match.
Moore sits squarely within Tornado Alley, where seasonal severe weather, hail events, and extreme temperature swings put constant stress on every exterior surface. The region’s notorious clay-heavy soils — known locally as Grady and Port series clay — cause foundation and wall movement that weaker siding materials cannot tolerate. At Moore Siding Pros, we install, replace, repair, and inspect fiber cement siding specifically engineered for Central Oklahoma’s climate demands. Call us today at (405) 956-2724 to schedule your free assessment.
Understanding Fiber Cement Siding
Fiber cement siding was commercialized in the early 1980s by James Hardie Building Products, which remains the category’s market leader today. The material replaced earlier asbestos-cement boards that had been used since the 1920s. By combining Portland cement with ground sand and cellulose wood pulp, manufacturers created a panel that mimics the look of wood lap siding, board and batten, shingles, or smooth stucco while delivering dramatically superior performance.
Each plank or panel is manufactured to precise thicknesses — typically 5/16 inch for lap siding and 7/16 inch for vertical panels — and is primed at the factory. Many products, including the James Hardie ColorPlus® line, arrive with a baked-on finish that carries a 15-year fade warranty. Because the material is non-combustible, it qualifies for Class 1-A fire ratings under ASTM E136 testing, a standard that matters in Moore’s dense residential neighborhoods where homes are often built on lots as narrow as 60 feet wide.
In Moore, fiber cement siding appears across a wide range of housing stock. The city experienced rapid post-war subdivision growth in the 1950s and 1960s, filling neighborhoods like Westmoore, Green Meadows, and Regency Park with modest ranch-style homes that originally featured wood siding or early aluminum cladding. Following the devastating May 3, 1999 F5 tornado and the equally destructive May 20, 2013 EF5 tornado — which cut a 1.3-mile-wide path through the city’s core — an enormous wave of reconstruction occurred. A significant share of those rebuilt homes and new construction projects chose fiber cement for its impact and wind resistance. Today, fiber cement siding is the fastest-growing exterior choice among Moore homebuilders and remodelers alike.
Fiber cement is suitable for single-family homes, duplexes, small commercial buildings, and multi-family structures throughout the Moore metropolitan area and surrounding communities including Norman, Midwest City, Del City, and Newcastle.
Our team in action — siding professionals serving Moore
Why Fiber Cement Siding Is Needed in Moore, OK
Tornado and Extreme Wind Events
Moore holds the grim distinction of being struck by violent tornadoes more than any other comparably sized city in the United States. The May 3, 1999 F5 tornado produced wind speeds estimated at 301 mph — the highest ever recorded — and the May 20, 2013 EF5 tornado killed 24 people and caused approximately $2 billion in damage across a corridor running through Briarwood, Plaza Towers, and Highland East neighborhoods. Standard vinyl siding routinely fails at sustained winds above 110 mph; its panels can peel away and become airborne projectiles. James Hardie HardiePlank® lap siding, by contrast, is tested to withstand winds up to 150 mph and carries impact resistance ratings under ASTM D1037 that make it substantially more likely to remain attached during severe wind events.
Hail Frequency and Impact Damage
Oklahoma ranks among the top three states nationally for hail frequency. Moore and the broader Cleveland County area experience an average of five to seven significant hail events per year, with stone diameters frequently reaching 1.5 to 2.5 inches. The spring 2023 hail event on April 19 produced golf-ball-sized hail across Moore, Del City, and Midwest City, causing widespread siding claims throughout the area. Fiber cement siding resists hail impact at the Class 4 level under UL 2218 testing, the highest available rating, which also typically qualifies homeowners for insurance premium discounts of 20–30% in Oklahoma.
Clay Soil Movement and Structural Flex
Moore and Cleveland County overlie expansive Grady and Port series clay soils that swell when saturated and shrink dramatically during drought. Oklahoma experienced one of its most severe multi-year droughts from 2011 through 2014, and again in 2022 when the state recorded its second-driest summer on record. This soil movement translates into measurable wall flex — often 1/8 to 3/8 of an inch of seasonal movement in older framing. Vinyl and aluminum siding, which rely on interlocking channels, crack or buckle under this stress. Fiber cement panels, fastened directly to sheathing with corrosion-resistant nails, flex minimally and maintain water-resistant integrity through seasonal cycles.
Humidity, Temperature Extremes, and Moisture Intrusion
Moore’s climate is classified as Cfa (humid subtropical with continental influences), meaning summer temperatures regularly exceed 100°F while winter lows can drop below 10°F — a swing exceeding 90 degrees Fahrenheit across a single year. This thermal cycling causes wood siding to split and cup, and it causes foam-backed vinyl to warp. Fiber cement has a very low moisture absorption rate (less than 6% by ASTM C1185 testing), meaning it does not swell, rot, or harbor mold in the way organic materials do. For Moore neighborhoods built in low-lying areas near Trosper Park or along tributaries of Buck Creek, where ground-level humidity is consistently elevated, this characteristic is particularly valuable.
Signs You Need Fiber Cement Siding Installation or Replacement in Moore
Visible Damage Indicators
- Cracked, dented, or punctured siding panels — especially after hail events common in Moore springs
- Warped, buckled, or bowed sections on south- and west-facing walls exposed to Oklahoma afternoon heat
- Missing panels or sections blown loose by wind
- Faded or peeling paint that has recurred within five years of the last paint job
Moisture and Structural Warning Signs
- Soft spots, sponginess, or visible rot at siding edges or butt joints
- Interior water stains on walls following rain events, indicating siding seal failure
- Mold or mildew streaking on the exterior surface, particularly on north-facing walls in Moore’s shaded areas
- Gaps larger than 1/8 inch between siding and trim or at corner joints
Urgency Indicators
- Siding age exceeding 20–25 years if original wood or aluminum — common in Moore’s post-1960s subdivisions
- Post-storm insurance adjuster report citing functional damage
- Elevated home energy bills suggesting compromised wall insulation due to air infiltration
If you observe two or more of these signs, contact Moore Siding Pros at (405) 956-2724 for a prompt siding inspection before the next severe weather season.
Fiber Cement Siding Methods and Approaches Used in Moore
Horizontal Lap Siding Installation
The most popular profile in Moore’s residential market, horizontal HardiePlank® lap siding replicates the look of traditional wood weatherboard at exposure widths of 6, 7, or 8.25 inches. This method is ideal for ranch-style and two-story homes throughout Westmoore, South Ridge, and the Regency Park neighborhood. Lap siding is installed with a minimum 1-inch clearance above grade to prevent soil contact, critical given Moore’s expansive clay soils.
Board and Batten Vertical Installation
HardiePanel® vertical siding combined with HardieTrim® batten strips creates bold board and batten elevations popular in newer construction along SW 19th Street and in the Newcastle Road corridor. This method suits craftsman, farmhouse, and modern exterior styles and installs faster on large flat wall planes. Learn more about Board and Batten Siding Installation
Full Replacement Over New Sheathing
For Moore homes with compromised OSB sheathing — particularly common in homes rebuilt after the 2013 EF5 tornado that have since experienced additional moisture intrusion — we remove all existing materials down to the studs, install new sheathing, and begin fresh. This approach is the correct method when more than 20% of the sheathing surface shows soft spots or delamination.
Partial Section Replacement and Repair
Insurance-covered hail or wind damage frequently affects only portions of a home’s exterior. We color-match existing fiber cement profiles and perform precise section replacement, minimizing disruption and cost. Learn more about our Siding Repair services
James Hardie Preferred Contractor Installation
As a James Hardie Preferred contractor, Moore Siding Pros installs all James Hardie products to HZ5® climate-zone specifications — the zone that covers Moore and all of Central Oklahoma — ensuring full manufacturer warranty validity. Explore our James Hardie Siding Installation services
Ready for Fiber Cement Siding? Get Your Free Estimate Today.
Moore Siding Pros serves Moore and the surrounding area — we’ll be on-site within 24 hours.
📞 Call (405) 956-2724Fiber Cement Siding Cost in Moore, OK
Fiber cement siding installation in Moore, Oklahoma, typically ranges from $8.50 to $14.00 per square foot installed, inclusive of materials, labor, and standard trim work. For an average Moore single-story ranch home of approximately 1,400 square feet of wall surface, total project cost commonly falls between $11,900 and $19,600. Larger two-story homes averaging 2,200 square feet of wall surface range from $18,700 to $30,800.
Key Cost Factors
- Profile and finish: Pre-painted ColorPlus® products cost $0.50–$1.25 per square foot more than primed-only boards but eliminate the cost of a separate paint application.
- Sheathing condition: Replacing damaged OSB or plywood adds $1.50–$3.00 per square foot for affected sections — a significant consideration for Moore homes with post-tornado repair histories.
- Story height: Two-story installations require taller staging or scaffolding, adding $500–$1,500 to project cost.
- Existing siding removal: Removal and disposal of old vinyl, wood, or aluminum siding typically adds $0.75–$1.50 per square foot.
- Insurance claims: Many Moore homeowners finance fiber cement upgrades through homeowner’s insurance hail and wind claims; we work directly with major insurers and can provide documentation packages.
Fiber cement siding costs approximately 30–50% more upfront than vinyl siding in the Moore market, but its 50-year material lifespan, reduced maintenance costs, and potential insurance premium savings of 20–30% annually typically produce a net positive return within 8–12 years. For a precise estimate, call us at (405) 956-2724. See our full Fiber Cement Siding Cost Guide
Moore, OK Neighborhoods We Serve
Westmoore (Built 1970s–1990s)
Westmoore’s mature ranch and split-level homes along SW 134th Street and Santa Fe Avenue frequently present original wood or early vinyl siding nearing end-of-life. Lot-line proximity and mature tree canopy create moisture-retention challenges that fiber cement handles well.
Plaza Towers and Highland East (Rebuilt 2013–2016)
These neighborhoods in the 2013 EF5 tornado’s direct path were substantially rebuilt. A portion of that reconstruction used entry-level vinyl siding now showing premature weathering. Fiber cement upgrades here are increasingly common as homeowners seek longer-term storm resilience.
Regency Park (Built 1980s–2000s)
Regency Park’s mix of brick-veneer and full-siding homes presents varied fiber cement opportunities — particularly gable ends, dormers, and rear elevations that lack brick coverage.
South Ridge and Broadmoore Estates (Built 2000s–2010s)
Newer construction in these areas often used mid-grade vinyl now showing hail damage from the April 2023 storm event. Fiber cement replacements on these homes qualify for the highest Class 4 hail-resistance insurance discounts available in Oklahoma. Schedule a Siding Inspection today
Fiber Cement Siding Maintenance Tips for Moore Homeowners
- Annual cleaning: Rinse fiber cement surfaces each spring after storm season using a garden hose. Oklahoma’s red clay dust and cottonwood seed accumulation can hold moisture against the surface if left unaddressed.
- Inspect caulk joints after winter: Moore’s freeze-thaw cycles — temperatures routinely oscillate across 32°F in December and January — can crack caulk at trim joints. Re-apply elastomeric caulk to any gaps wider than 1/16 inch.
- Maintain 1-inch soil clearance: Moore’s clay soils expand significantly when wet. Keep mulch and soil at least 2 inches below the bottom siding course to prevent moisture wicking.
- Repaint on schedule: Factory-primed (non-ColorPlus®) fiber cement should be painted within 180 days of installation and repainted every 10–15 years with an exterior acrylic finish.
- Post-hail inspection: After any storm producing hail larger than 1 inch, visually inspect siding for paint cracking or surface fractures. Schedule a professional Siding Inspection if damage is suspected.
- Trim back vegetation: Moore’s fast-growing Eastern red cedar and Bradford pear trees should be trimmed to maintain 6-inch clearance from siding to prevent moisture retention and scratching.
- Check for woodpecker activity: Though fiber cement is not palatable to termites, woodpeckers in the Moore area can occasionally probe for insects behind panels; inspect fastener points if this occurs.
Why Choose Moore Siding Pros for Fiber Cement Siding in Moore, OK
Moore Siding Pros is a locally operated siding company built specifically around the demands of Central Oklahoma’s severe weather environment. We are not a national franchise — we are Moore neighbors who understand the unique challenges of installing and maintaining exterior cladding in Tornado Alley. Our crews are trained and current on City of Moore building code requirements, James Hardie HZ5® climate zone installation protocols, and Oklahoma insurance documentation practices.
We specialize in fiber cement siding installation, replacement, repair, and inspection, along with vinyl siding installation, and full siding replacement services across Moore and surrounding communities including Norman, Midwest City, Del City, Newcastle, and Oklahoma City. Every project is managed by an experienced field supervisor and backed by manufacturer warranty support.
Ready to protect your Moore home with fiber cement siding? Call us at (405) 956-2724 or request a free estimate online.
Frequently Asked Questions: Fiber Cement Siding in Moore, OK
How much does fiber cement siding cost in Moore, OK?
In Moore, fiber cement siding installation typically costs between $8.50 and $14.00 per square foot installed, including labor and standard trim. An average single-story Moore home runs $11,900–$19,600 total. Factors like sheathing replacement, story height, and choice of pre-painted ColorPlus® finish affect final pricing. See our detailed cost breakdown
How long does fiber cement siding last in Oklahoma’s climate?
Properly installed and maintained fiber cement siding has a rated service life of 50 years and is backed by James Hardie’s 30-year non-prorated product warranty. In Moore’s severe weather environment, this longevity advantage over vinyl (20–25 year lifespan) and wood (15–20 year lifespan) is a major financial consideration.
Will fiber cement siding help my Moore home survive tornadoes?
Fiber cement siding is wind-rated to 150 mph under James Hardie testing standards and is significantly more resistant to wind-driven debris impact than vinyl siding. While no siding can guarantee survival in a direct EF5 tornado hit — as Moore experienced in 1999 and 2013 — fiber cement dramatically outperforms alternative materials in the EF0–EF2 wind range that constitutes the majority of Oklahoma severe weather events.
Does fiber cement siding qualify for insurance discounts in Oklahoma?
Yes. Fiber cement siding rated Class 4 under UL 2218 hail impact testing qualifies for homeowner’s insurance premium discounts ranging from 20% to 30% with most major Oklahoma insurers. We can provide all necessary documentation and product certifications to support your discount application.
How long does a fiber cement siding installation take in Moore?
Most Moore residential projects — single-story homes up to 2,000 square feet — are completed in two to four days of installation work. Larger two-story homes or projects requiring full sheathing replacement may run five to seven days. Permit processing through Moore City Hall adds three to five business days before work begins.
Can I use insurance money to upgrade from vinyl to fiber cement siding?
Many Moore homeowners successfully upgrade to fiber cement siding using hail or wind insurance claims. The insurance settlement covers replacement-in-kind value; the homeowner pays the difference (upgrade cost) between the insurance payout and fiber cement pricing. We work directly with adjusters and provide line-item estimates formatted for insurance submission. Learn more about insurance-based siding replacement
Is a building permit required for siding replacement in Moore, OK?
Yes. The City of Moore requires a building permit for exterior re-siding projects. Moore Siding Pros manages the permit application process on your behalf as a standard part of every project. We also schedule and attend the required final inspection.
What is the difference between James Hardie siding and generic fiber cement?
James Hardie products are manufactured to climate-zone specifications — Moore falls in HZ5, their humid/hot zone — using proprietary formulations that reduce moisture absorption. Generic fiber cement boards are manufactured to broader standards and may not carry equivalent moisture or warranty protections. As a James Hardie Preferred installer, we install only HZ5-rated products for Moore projects. Learn more about James Hardie Siding Installation
Get a Free Fiber Cement Siding Estimate in Moore, OK Today
Moore’s severe weather seasons do not wait — and neither should your home’s exterior protection. Whether your siding was damaged by the April 2023 hail storm, is aging past its functional lifespan, or you simply want the most durable cladding available in the Moore market, Moore Siding Pros is ready to help.
We serve Moore, Norman, Midwest City, Del City, Newcastle, Oklahoma City, and all surrounding Central Oklahoma communities. Our estimates are free, detailed, and insurance-documentation ready.
Call us now at (405) 956-2724 to schedule your on-site assessment, or submit your information online and we will contact you within one business day. Protect your Moore home with fiber cement siding that is built to last through whatever Oklahoma’s skies deliver.