Board and Batten Siding in Moore, OK
Professional Board and Batten Siding in Moore, OK in Moore, OK — Licensed, Insured & Locally Owned
Get expert board and batten siding installation in Moore, OK. Moore Siding Pros installs fiber cement, vinyl & more. Call (405) 956-2724 for a free estimate.
- Licensed & Insured
- Locally Owned & Operated
- Free Inspection & Estimate
Request Your
Free EstimateBoard and batten siding is a classic vertical cladding system that alternates wide flat boards with narrow strips — called battens — to create a clean, textured exterior profile. This style has experienced a dramatic resurgence across Moore, Oklahoma, where homeowners are upgrading aging exteriors with a look that blends traditional charm with modern durability.
Moore’s climate presents a unique set of challenges for any exterior cladding. From the powerful tornado activity the city has experienced — including the catastrophic EF5 storms of 1999 and 2013 — to the expansive clay soils that cause foundation and wall movement, the right siding must do more than look good. It must hold up year after year.
At Moore Siding Pros, we specialize in board and batten siding installation, replacement, and repair tailored specifically to Moore and the surrounding Oklahoma City metro communities. Whether you’re building new or restoring storm-damaged cladding, our team delivers expert craftsmanship backed by deep local knowledge. Call us today at (405) 956-2724 to schedule a free consultation.
Understanding Board and Batten Siding
Board and batten siding is one of North America’s oldest exterior cladding methods, originating in the mid-19th century as a practical solution for frontier farmhouses, barns, and rural structures across the Great Plains — including the Oklahoma Territory itself. The design consists of wide vertical boards (typically 6 to 12 inches wide) installed side by side, with narrower batten strips (usually 2 to 4 inches wide) placed over the seams between boards. This alternating pattern creates a striking vertical shadow line that visually elongates a home’s facade.
Historically, board and batten was used primarily on agricultural buildings and modest homes because vertical installation shed rainwater efficiently and the narrow battens provided a weather-tight seal. In the Oklahoma panhandle and central regions, early settlers adopted this style widely because raw lumber was among the most accessible and affordable building materials available.
Today, modern board and batten siding is available in multiple materials that far outlast the original wood construction. The most common options installed in Moore include:
- Engineered Wood (LP SmartSide): Lightweight, pre-primed, and treated to resist moisture and insects — well-suited for Oklahoma’s humidity swings.
- Fiber Cement (James Hardie HardiePanel): Non-combustible, impact-resistant, and capable of withstanding Oklahoma’s extreme temperature fluctuations from below 0°F in winter to over 110°F in summer.
- Vinyl: Low-maintenance and budget-friendly, though expansion and contraction in Moore’s dramatic seasonal swings must be carefully managed during installation.
- PVC Trim and Panel Systems: Dimensionally stable options popular for accent walls and modern farmhouse designs.
In Moore, board and batten siding is particularly popular on ranch-style homes built in the 1970s through 1990s that are due for an exterior refresh, as well as on new construction in developing neighborhoods like Bellevue Estates and along SW 19th Street corridors. The vertical orientation of the siding complements the horizontal landscapes of central Oklahoma, and the bold shadow lines add architectural interest to the relatively flat terrain.
Learn more about our full range of options through our fiber cement siding installation and vinyl siding installation service pages.
Our team in action — siding professionals serving Moore
Why Board and Batten Siding Is Needed in Moore, OK
Tornado and Severe Wind Events
Moore sits in one of the most tornado-active corridors in the United States. The May 3, 1999 F5 tornado generated wind speeds measured at approximately 318 mph — the highest ever recorded — and carved a path directly through central Moore neighborhoods including Westmoore and areas near SW 4th Street. The May 20, 2013 EF5 tornado struck with winds exceeding 210 mph, devastating the Plaza Towers and Briarwood Elementary school areas along SW 149th Street. Thousands of homes required complete exterior re-cladding after each event. Traditional horizontal lap siding on many of these homes failed partly because it presents horizontal channels that catch lateral wind pressure. Board and batten siding installed vertically with proper fastening schedules and code-compliant nailing patterns provides a more aerodynamically favorable profile and reduces the risk of panel uplift during wind events.
Oklahoma Clay Soils and Wall Movement
Moore and the broader Oklahoma City metro sit atop highly expansive Garvin and Grady series clay soils. These soils shrink dramatically during drought — Moore averages approximately 35 inches of annual rainfall but experiences significant dry stretches — and swell equally dramatically when saturated. This volume change causes subtle but persistent movement in home foundations and wall framing, which stresses traditional horizontal siding at seams and nailing points. Board and batten siding, because it uses a double-layer fastening system (boards nailed first, battens nailed over them), accommodates minor wall movement better than single-layer cladding systems, reducing cracking and gapping over time.
Extreme Temperature Cycling
Moore regularly experiences temperature swings exceeding 90°F within a single calendar year — from summer highs above 105°F to winter lows below 5°F. In January 2021 during Winter Storm Uri, temperatures in the Moore area dropped to approximately -14°F, causing many vinyl siding panels installed in the 1990s to crack and shatter from thermal contraction. Fiber cement board and batten products like James Hardie HardiePanel are rated for these exact conditions and do not suffer the brittleness issues vinyl exhibits at extreme cold temperatures.
Hail Damage Frequency
Central Oklahoma ranks among the top states for hail frequency and intensity. The Moore area experiences significant hail events multiple times per year. April and May hailstorms routinely produce stones 1.5 to 2.5 inches in diameter that dent aluminum, crack vinyl, and chip paint on wood siding. Fiber cement board and batten is tested to impact resistance standards (ICC 500 and Miami-Dade protocols) that make it significantly more resistant to hail damage than most competing materials, reducing long-term insurance claims and maintenance costs for Moore homeowners.
Moisture and Humidity Cycling
Moore averages relative humidity levels between 60 and 75 percent during spring and fall months, creating ideal conditions for wood rot, mold growth, and paint failure on older wood-based sidings. Many homes in established Moore neighborhoods like Regency Park and Country Club Estates were originally clad with T1-11 plywood siding or cedar lap siding that is now decades old and significantly degraded. Replacing these with moisture-resistant board and batten systems eliminates recurring rot repair costs.
Explore related services including siding repair and siding inspection to assess the current condition of your home’s exterior.
Signs You Need Board and Batten Siding Installation or Replacement in Moore
Visible Structural Damage
- Cracks, splits, or holes in existing siding panels larger than ¼ inch in width
- Missing batten strips or boards exposing house wrap or sheathing underneath
- Warping or bowing panels that protrude more than ½ inch from the wall plane
- Hail impact dents or bruising across multiple panels following a storm event
Moisture and Biological Damage
- Soft, spongy, or disintegrating sections when pressed — indicating active wood rot
- Black, green, or gray discoloration that does not wash off with normal cleaning — indicating mold or algae colonization
- Paint peeling or bubbling in repeated patterns, especially near seams and nailing points
- Interior wall staining or damp drywall adjacent to exterior walls — indicating water infiltration through failed siding
Performance and Energy Efficiency Decline
- Noticeably higher heating or cooling bills — compromised siding eliminates the thermal break at the wall assembly
- Drafts felt near exterior walls on windy days
- Gaps visible at siding seams greater than 1/8 inch that allow air and pest infiltration
Urgency Indicators
If your home experienced direct wind damage during a severe weather event in the past 12 months or if you observe active water intrusion after rain, contact Moore Siding Pros immediately at (405) 956-2724 for an emergency inspection. Water inside wall cavities can cause structural sheathing damage within 48 to 72 hours in Moore’s warm, humid spring conditions.
Board and Batten Siding Methods and Approaches We Use in Moore
Traditional Full-Wall Board and Batten
The entire exterior facade is clad in vertical board and batten panels from foundation to roofline. This is the most comprehensive approach and is ideal for homes in Moore requiring full siding replacement after storm damage or for new construction projects. Provides maximum weather protection and a cohesive aesthetic throughout.
Partial or Accent Board and Batten
Board and batten is applied to gable ends, dormers, bump-outs, or lower story sections while the remainder of the home uses a complementary siding style such as horizontal lap or shake. This approach is popular in Moore’s newer subdivisions like Bellevue Estates and Silver Creek, where homeowners want a modern farmhouse aesthetic without a complete re-clad of sound existing siding.
Fiber Cement Board and Batten (James Hardie HardiePanel)
The preferred method for Moore homeowners seeking maximum wind and hail resistance. James Hardie HardiePanel Vertical Siding paired with HardieTrim batten boards is installed per Hardie’s WindCode requirements, which we follow for compliance with Moore’s local building codes — particularly important in a municipality that has revised its building codes significantly following the 2013 tornado disaster.
Engineered Wood Board and Batten (LP SmartSide)
A lighter-weight, more economical alternative to fiber cement that still offers excellent moisture and impact resistance. LP SmartSide panels are pre-primed and factory-treated, reducing long-term maintenance compared to traditional wood. Best suited for Moore homes in areas with moderate storm exposure where budget is a primary consideration.
Vinyl Board and Batten Panels
An entry-level option for budget-conscious projects. Installation in Moore requires careful attention to expansion gap requirements — vinyl can expand up to ½ inch per 12-foot panel in Oklahoma’s summer heat. Best reserved for sheltered elevations or garage facades rather than primary weather-exposed walls.
See also: James Hardie siding installation for more information on our fiber cement services.
Ready for Board and Batten Siding? Get Your Free Estimate Today.
Moore Siding Pros serves Moore and the surrounding area — we’ll be on-site within 24 hours.
📞 Call (405) 956-2724Board and Batten Siding Cost in Moore, OK
Understanding realistic pricing for board and batten siding helps Moore homeowners budget accurately and avoid surprises. Costs vary based on material choice, home size, story height, and extent of substrate repairs needed. Below are current market ranges for the Moore, Oklahoma area as of 2024.
Material Cost Ranges (Installed, Per Square Foot)
- Vinyl Board and Batten: $4.50 – $7.00 per square foot installed
- Engineered Wood (LP SmartSide): $7.00 – $10.50 per square foot installed
- Fiber Cement (James Hardie HardiePanel): $9.00 – $14.00 per square foot installed
- Premium PVC / Cellular PVC: $11.00 – $16.00 per square foot installed
Typical Total Project Costs in Moore
- Small home (under 1,200 sq ft of siding surface): $6,500 – $14,000
- Average Moore home (1,200–2,000 sq ft of siding surface): $12,000 – $24,000
- Larger or two-story home (2,000–3,500 sq ft of siding surface): $20,000 – $40,000+
Moore-Specific Cost Factors
Storm damage substrate repair: Homes in Moore that sustained damage during past tornado events often have compromised OSB sheathing that adds $1,500 to $5,000 in repair costs before new siding can be installed. This is a frequent finding in homes built before 2000 in neighborhoods like Westmoore and Country Club Estates.
Insurance claims: Many Moore homeowners filing hail or wind damage claims can offset 40 to 80 percent of replacement siding costs through homeowners insurance. Moore Siding Pros works directly with insurance adjusters and can provide detailed documentation to support your claim.
Permit fees: Moore Building Services requires siding permits for full replacements, typically adding $150 to $300 to total project costs.
Call us at (405) 956-2724 for a free, itemized estimate specific to your home. See also: Board and Batten Siding cost guide for detailed pricing breakdowns.
Moore Neighborhoods We Serve
Westmoore / SW 4th Street Corridor
Built predominantly in the 1970s and 1980s, this area bears the most direct historical exposure to Moore’s major tornado paths. Many homes here are on their third or fourth siding system following damage events. Substrate inspection and reinforced fastening schedules are essential here.
Bellevue Estates and South Moore New Construction
Homes constructed from 2015 onward in these growing subdivisions are increasingly specifying board and batten as a primary cladding style. Fiber cement and engineered wood are the dominant materials, consistent with updated post-2013 building practices in Moore.
Regency Park and Country Club Estates
These established neighborhoods feature homes built in the late 1980s through 1990s with T1-11 plywood or older wood lap siding that is now 25 to 35 years old and frequently showing active rot and moisture damage. Board and batten replacement projects are extremely common here.
Norman, Del City, and Midwest City
We also serve homeowners in neighboring communities. Explore our full service coverage: complete service area listing.
Board and Batten Siding Maintenance Tips for Moore Homeowners
Proper maintenance significantly extends the life of your board and batten siding in Moore’s demanding climate. Follow these location-specific recommendations:
- Annual Spring Inspection: After tornado season (typically March through June), inspect all siding panels and batten strips for cracks, loose fasteners, or impact damage from hail or wind-driven debris.
- Caulk Inspection and Reapplication: Inspect caulk at all trim, window, and door junctions annually. Oklahoma’s freeze-thaw cycles degrade standard caulk within 3 to 5 years — use elastomeric, paintable sealants rated for -20°F to 150°F.
- Repainting Fiber Cement: James Hardie recommends repainting HardiePanel every 10 to 15 years. In Moore’s intense UV environment, plan closer to 10-year cycles for south- and west-facing elevations.
- Clear Vegetation: Trim back any shrubs or vines contacting siding. Oklahoma’s warm, humid springs accelerate mold and moisture damage on any siding system where airflow is blocked.
- Gutter Maintenance: Ensure gutters are clear before each spring storm season. Overflowing gutters saturate the bottom courses of board and batten, the most vulnerable area for rot and moisture infiltration.
- Low-Pressure Washing: Clean siding annually with a garden hose or low-pressure washer (under 1,500 PSI). Avoid high-pressure washing, which forces water behind batten strips and behind the weather barrier.
- Post-Hail Inspection: After any hail event producing stones 1 inch or larger, conduct a visual inspection or call Moore Siding Pros for a professional siding inspection to document damage before filing an insurance claim.
Frequently Asked Questions About Board and Batten Siding in Moore, OK
How much does board and batten siding cost in Moore, OK?
In Moore, board and batten siding installation typically costs between $4.50 and $16.00 per square foot installed, depending on material. For an average Moore home with approximately 1,500 to 1,800 square feet of siding surface, most homeowners budget between $12,000 and $24,000 for a full fiber cement board and batten installation. Substrate repairs needed in older homes, particularly those in Westmoore or Regency Park, can add $1,500 to $5,000 to that total. Call us at (405) 956-2724 for a free itemized estimate.
How long does board and batten siding installation take in Moore?
A typical single-story Moore home takes 4 to 6 days of active installation work from removal of old siding to final trim completion. Two-story homes or those with complex elevations, gable details, or significant substrate damage may require 7 to 10 days. Weather delays during Moore’s unpredictable spring storm season are factored into our scheduling.
Is board and batten siding a good choice for tornado-prone areas like Moore?
Fiber cement board and batten siding — particularly James Hardie HardiePanel installed to WindCode specifications — is one of the most appropriate choices for Moore’s tornado-adjacent climate. It is non-combustible, impact-resistant to hail, and when properly fastened to framing with code-required nailing schedules, it performs significantly better in high-wind events than standard horizontal vinyl or wood lap siding.
Can I use insurance to pay for board and batten siding replacement in Moore?
Yes, many Moore homeowners successfully use homeowners insurance to cover a significant portion of siding replacement costs following hail or wind damage. Oklahoma insurance adjusters are familiar with Moore’s storm history. Moore Siding Pros provides detailed inspection reports and photo documentation to support your claim. We recommend filing within 12 months of a qualifying storm event.
What is the best material for board and batten siding in Moore, OK?
For most Moore homeowners, James Hardie HardiePanel fiber cement is the best all-around choice. It withstands Oklahoma’s extreme temperature swings (from -14°F during events like Winter Storm Uri in February 2021 to 110°F+ summer highs), resists hail impact, does not rot, and carries strong manufacturer warranties. Engineered wood (LP SmartSide) is an excellent budget-friendly alternative for areas with lower direct storm exposure.
Do I need a permit for siding replacement in Moore, OK?
Yes. The City of Moore Building Services Department requires a permit for full siding replacement projects. Permit fees are typically $150 to $300. Moore Siding Pros handles all permit applications on your behalf as part of our standard installation process.
Can board and batten siding be installed over existing siding in Moore?
In some cases, new board and batten panels can be installed over existing siding if the substrate is sound, flat, and properly secured — but in Moore, we typically recommend full removal. Given the prevalence of moisture damage in older homes here and the need to inspect sheathing condition after years of Oklahoma storm seasons, removing old siding first ensures we can address any hidden damage before it causes further problems.
Do you serve areas outside Moore, OK?
Yes. Moore Siding Pros serves the entire Oklahoma City metro area, including Norman, Del City, Midwest City, Oklahoma City, Newcastle, Choctaw, Spencer, Nicoma Park, The Village, Valley Brook, and more. See our full service area page for details.
Get a Free Board and Batten Siding Estimate in Moore, OK Today
If your Moore home’s exterior is showing its age — or if it was damaged in one of Oklahoma’s fierce hail or wind events — now is the time to invest in a durable, beautiful board and batten siding system built to handle everything the central Oklahoma climate can deliver.
Moore Siding Pros is ready to help. We offer free, no-obligation estimates, work directly with insurance adjusters on storm damage claims, and serve Moore and all surrounding communities throughout the Oklahoma City metro.
Contact us today:
- Phone: (405) 956-2724
- Online: Schedule a Free Consultation
Don’t wait for the next storm season. Protect your home with expertly installed board and batten siding from the team that knows Moore best — Moore Siding Pros.